Honeywell Urban Air Mobility

Posted on August 28, 2020 by Student Spotlights

By Henrik Hoffmann

Hi, I am Henrik Hoffmann a rising Aerospace Engineering senior, and during my junior year I had the privilege to work on the Urban Air Mobility (UAM) project with Embry-Riddle’s Undergraduate Research Institute (URI), which was sponsored by Honeywell Aerospace for the fall and spring semester. Through the support of the URI, Dr. Johann Dorfling, and with the support of Honeywell engineers, UAMs flight testing and data analysis started at the end of our summer internship and is planned to finish during the 2020 fall semester.

The purpose of this project for my junior school year and summer internship was to characterize the power requirements, climb profile, and descent profile capabilities of various simulated UAMs. I also helped define required UAM flight capabilities, most efficient flight paths, and UAM limitations. Multiple configurations and concepts of UAM aircraft are being proposed, designed, and built by a variety of companies such as Airbus, Joby Aviation, Kitty Hawk, Lilium, Terrafugia, Uber Air, VA-1X and Volocopter. Concepts for these UAMs include multirotor, fixed wing, and rotating rotor wing designs.

*Me (third from right) with the rest of the Embry-Riddle Aeronautical University UAM Team after presenting to the Honeywell representatives.*

To join this project, our team had to submit a resume and letter of recommendation to Honeywell to get an interview. Our team consists of six Embry-Riddle students, our mentor Dr. Dorfling, as well as multiple Honeywell engineers. The major job of our first semester was to submit a survey to Honeywell that included a design of our drone, flight test plans, wind tunnel test plans, and a characterization of our drone compared to previous UAM designs. During the second semester we built our UAM, and 3-D printed a compartment designed to better help predict and characterize UAMs similar to ours.

Due to Covid-19, our project was not finished over the school year and got pushed into our summer internship. As a result, our internship was conducted virtually, and our project’s progress was slowed. But over the summer, small test flights took place along with error analysis, and I worked with Honeywell Aerospace’s Electrical Power Group in Torrance, California on the Next Generation Jammer Program (NGJ). My work with the NGJ tested mid band as well as low band performance calculation of the Ram Air Turbines Generation (RATG).

Over this summer of 2020, Bell conducted the first customer flight test of UAM designs our team worked on, and I can see where the research my team and I are doing will be implemented in the future. Our team’s UAM project will continue over the 20/21 school year and will include our first test flight. That will allow us to analyze the data to predict the optimal flight takeoff and landing paths for our UAM design. The upcoming Honeywell UAM Team will include a mix of returning team members as well as new juniors to finish off the project. Once our project is finished up the same process will be restarted with another UAM type, and could include multirotor, fixed wing, or rotating rotor designs.

*Our visit to the Honeywell location in Deer Valley, Ariz.*

The experiences I gained with my team and during my summer internship has been amazing. Working on this project has allowed me to apply what I have learned from the classroom and to see how our work will change transportation around the world. Our internship has also allowed me to experience Honeywell’s corporate environment and further my understanding of UAM. I have enjoyed this project and would highly recommend this opportunity to anyone!

The Road to Senior Year

Posted on August 20, 2020 by Bria

by Bria Booth

Hello! My name is Bria Booth. I am an Aerospace Engineering and Systems Engineering student at Embry-Riddle’s Prescott Campus. I’m excited to say that I will be a student blogger during my senior year! While our fall semester will be quite a bit different than usual (social distancing, hybrid classrooms, and masks), I look forward to telling you all about it while sharing some of my favorite stories from the last three years.

Next year, I’ll be Member Development Vice President of Alpha Xi Delta (one of our campus’s sororities), Editor-in-Chief of the campus newspaper, and working on my Capstone project. Three things that I’ve been hoping for and looking forward to since my first year on campus. Even though the year is shaping up to be quite a bit different than I would have expected three years ago, I’m excited for everything that I have planned.

Now that I’m entering my last undergraduate fall semester I’m ready to get back to the classroom. I won’t lie, it’s been nice to have time to slow down and de-stress over the last few months. My summer has been slower than expected, but I wouldn’t call it un-eventful. I’m working on a virtual musical, fostering kittens, and taking online classes. I’ve done my best to stay busy and connected with friends and my community while staying safe.

I may be an engineering student, but in high school and middle school, I was a committed thespian. Whenever I’m home, I volunteer at the children’s theater that I grew up participating in. I’ve assistant directed, assistant choreographed, and stage-manged for several of their productions since I’ve left the stage. Their adult company is working on a virtual performance of In The Heights, which I’ve been lucky enough to be a part of. It’s always been important to me to find a creative outlet when I’m stressed, so this show couldn’t have come at a better time.

I started fostering kittens for spcaLA a few years ago, and it’s one of the most rewarding things I’ve ever done. I take anywhere between 1 and kittens and get to teach them to play and snuggle. Honestly, there are no downsides. I got the call from spcaLA that they had a kitten for me the day that I finished my spring finals. Since then, I’ve had 4 kittens come through my house this summer. Right now, I’m looking after a little black and white ball of fluff named Chai. He’s one of the sweetest cats I’ve ever met, and the perfect foster to finish the summer on.

I’ve had a lot of fun things to do this summer, but it was important to me that I was doing something productive while stuck at home. Through Embry-Riddle Worldwide, I’m taking Chemistry, Chemistry Lab, and Probability and Statistics online. When I added a Systems Engineering Minor to my track, my schedule got a bit cramped. I chose to take classes during a few of my summers so that I would still be able to graduate in four years. Embry-Riddle has made it so easy to do because of the options for online learning. My academic advisor helped me walk through my 4-year plan and map out what could be taken over summer to best free up time during the school year.

I am looking forward to next year, whatever challenges it may bring. It is so crazy to think that I am (hopefully) just two semesters away from graduation! I still can’t believe that I’ve been able to get through the last three years. It really doesn’t feel like it has been that long.

Thank you for reading, and I hope you’ll come back to this blog as I write about my senior year as an Aerospace Engineering student at Embry-Riddle Aeronautical University’s Prescott Campus!

Top Outdoor Spots on Campus

Posted on August 13, 2020 by Richard

by Richard Santi

The Embry-Riddle Prescott Campus is covered with absolutely beautiful scenery. What’s even better is the fact that we get over 300 days of beautiful weather in Prescott. On any given day, students love to sit outside and socialize, do homework, or merely sit and enjoy the outdoors. There are a number of awesome spots on campus that provide nice outdoor spots to sit and enjoy the day. Here are some of my favorites:

The Quad

One of the awesome parts about going to school here is that we have Wi-Fi coverage on pretty much the whole campus. If you want to do work on the grass or by the benches that are perfectly sun protected with awnings, you absolutely can! Though most people like to use the quad to throw the frisbee around or host some other recreational event when the weather is nice (which is pretty much all the time).

Center of Campus

We have a beautiful green space right in the center of a number of classrooms. A lot of students will hang out and socialize here until the next class starts. The large trees nearby make for great shade! There are a number of campus services located nearby, including the Cashier’s Office, Mailroom, Campus Safety, and our barbershop on campus known as the Hairport!

The Patio

Right outside of our STEM Education Center, we have a beautiful new patio that is great for hanging out with friends and waiting for the next class to start. It is covered with beautiful trees and has nice new benches that face each other so that you and your friends can interact!

Outside of AXFAB

Our Aerospace Experimentation and Fabrication Building is used by our Aerospace Engineers to complete their capstone projects. On the outside of the building, we have a large propeller which comes from a Boeing KC-97 Stratofreighter. It was one of four propellers mounted at the same height it would be on the actual aircraft. It makes a pretty stunning sight to sit at one of the benches outside looking right up to it.

Patio Outside Student Union

Underneath the Embry-Riddle colored awnings outside of the Jack R. Hunt Student Union, we have an awesome patio area that is used by a lot of different student groups and organizations to host events. It is also a great place to eat lunch after going to our World of Wings Cafe or our Rocket Deli & Salads, both located right inside of our Student Union!